All you want to ask about IP sell process

IPv6 was created to solve the problems that IPv4 can not handle. First of all, this should happen due to the use of address numbers 128 bits instead of 32. After the IPv4 address space is over, the sixth and fourth generation protocols will be used in parallel, with the update of the proportion of IPv6 traffic compared to IPv4. This situation will become possible due to the large number of outdated devices that do not support IPv6 and require special conversion to work with devices using only IPv6.

Since summer 2015, the RIPE NCC has made changes to the rules for registering IP-resources. Autonomous systems can now be transferred from one owner to another by a written application. IPv4 network within 24 months if this network has just been registered or transferred to a new owner.

The user of PI-addresses (ISPs) can also have their own blocks of IPv4 addresses to other users partially or completely, even without the need to obtain LIR status. The minimum block size The IPv4 address that can be transmitted is /24 (256 IP). Such a transfer is possible only in case of PA-address space transfer and only between organizations that have LIR status.

To obtain the transfer process, you must provide the following information to the RIPE NCC:

1. Range for transmission (size and block).

2. The name and contacts of the old and new owners.

3. Current versions of registration documents on sites.

4. The reason for the transfer (for example, if the structure of the organization changes, then describe these changes).